Optimize your electric-assist bike's transmission with the 170 mm SHIMANO STEPS FC-E6100 crank series. Designed to meet the demands of everyday electric mobility, this pair of cranks contributes to a smoother pedaling feel, better effort control and appreciable reliability on both urban commutes and longer outings.
Part of the SHIMANO STEPS ecosystem, this crank set is a central component of your drivetrain: it converts your pedaling into movement, with a design conceived for e-bike use. This model is offered without chainrings, ideal if you wish to keep or select a chainring adapted to your existing assembly, according to your bike's recommendations.
Key points for your electric bike :
↓ Scroll down to see detailed technical specifications at the bottom of the sheet.
Warranty : 2 years
Product overview
The SHIMANO STEPS FC-E6100 crank set in 170 mm length is a crankset designed for electric-assist bicycles equipped with the SHIMANO STEPS system. Supplied here without a chainring, this crank is designed for the identical replacement or reconditioning of a crankset assembly, to restore stable pedaling and a clean assembly on your EAB.
Benefits for the user
With a crank adapted to the SHIMANO STEPS ecosystem, you secure the transmission of effort between your pedals and the electric assist, for smooth pedaling and a more even feel in everyday use. The "chainring-less" format means you can keep your existing configuration or replace only the part you need - practical in the workshop and economical for targeted repairs.
Technical specifications
Brand: SHIMANO. Range: STEPS. Model: FC-E6100. Type: series of cranks / crankset for VAE. Crank length: 170 mm. Configuration: without chainring (cranks delivered without chainrings).
Recommended uses
Recommended for maintenance, repair or replacement of cranksets on electric bicycles equipped with SHIMANO STEPS motorization, especially when the 170 mm crank length corresponds to your original assembly or to the desired ergonomics. Suitable for reconditioning after wear, impact or play at crank level.
Known compatibilities
Compatibility indicated: SHIMANO STEPS VAE systems (FC-E6100 series). No other compatibility (chainrings, axles, bottom bracket standards or motor models) is specified in the information provided.
Expert advice
Before ordering, check the crank length (170 mm) indicated on your original part and confirm that your bike is fitted with a SHIMANO STEPS FC-E6100 crankset. During assembly, check that the cranks are tightened to the torque recommended by the manufacturer and that the splines are in good condition to avoid any play. If your chainring is worn or if the chain line poses a problem, plan a complete diagnosis of the drivetrain (chainring, chain, cassette) to preserve the efficiency and longevity of the assistance.