Dualtron Controller 52V 25A POP Single Motor [Minimotors]

Product overview

The Dualtron 52V 25A POP single-motor controller from Minimotors is an essential electronic part for controlling and managing power on a Dualtron electric scooter in single-motor configuration. It provides the link between the 52V battery and the motor, regulating the power supply according to acceleration commands and system parameters, to guarantee stable operation of the whole system.

Concrete benefits for the user

This 52V 25A controller is designed to replace an original controller or to restore proper operation of a Dualtron electric scooter in the event of an electronic failure. It enables consistent management of the single motor's power supply, with current distribution adapted to a 52V battery. In maintenance, it's a key component for ensuring the reliability of repairs and restoring a soft mobility vehicle to service without modifying the electrical architecture.

Technical specifications (available data)

Controller for Dualtron electric scooters, designed for a 52V power supply, with a rated current of 25A, and intended for a single motor configuration. Version/format indicated: POP. Brand: Minimotors. Category: controller / electronics.

Recommended uses

Recommended for replacing a faulty controller on a Dualtron 52V single-motor electric scooter, or as part of an electronic repair (motor control failure, blackouts, power management malfunction) when the diagnosis confirms that the controller is at fault. Ideal for curative maintenance to restore the system's original operation.

Compatibility

Compatibility explicitly stated: Dualtron, 52V configuration, single motor. No other compatibility (precise models, connectors, displays, harnesses, alternative controllers) is provided: it is therefore essential to check the exact match with your scooter (version, connectors, layout and POP format) before purchase.

Information not supplied

Weight, dimensions, type of connectors, detailed electronic protections and Dualtron models compatible on a case-by-case basis are not indicated in the information available.

Expert advice

Before replacement, accurately identify the battery pack voltage (52V) and confirm that it is a single motor configuration. Visually check connectors and format (POP) to avoid any bundle incompatibility. When reassembling, switch off the power supply, disconnect the battery first, and check for any abnormal heating after reassembly. If in doubt about compatibility or diagnostics, have the part validated by a professional to avoid damaging the battery, motor or wiring harness.