Motor 52V 1200W 6/B38 KuKirin G3 Pro – short cable

Product overview

The KuKirin G3 Pro 52V 1200W 6/B38 motor (short cable) is a replacement motor for KuKirin G3 Pro electric scooter users looking for a suitable solution to get their soft mobility vehicle back into service. Designed to operate on a 52V architecture and rated at 1200W, it aims to restore the motor's original behavior (responsiveness, relaunching and ability to maintain regular assistance depending on the scooter's configuration).

Concrete benefits for the user

This motor can be used to replace a faulty or worn motorization, providing stable traction and greater peace of mind in daily use. The "short cable" format facilitates integration when the harness routing is designed for a reduced length, which can contribute to cleaner assembly and reduced cable clutter in the dedicated compartment.

Technical specifications

- Rated voltage: 52V
- Power: 1200W
- Version/reference: 6/B38
- Wiring: short cable
- Type of product: motor (motorization spare part)
- Brand: Kugoo

Recommended uses

This motor is recommended for the replacement of an original motor on a compatible electric scooter, notably in the context of a repair (loss of power, motor failure, abnormal noise, rotation malfunction) or overhaul. It is also suitable for drive train maintenance operations when a diagnosis confirms that the motor is at fault.

Known compatibilities

Compatibility indicated: KuKirin G3 Pro. As no other compatibility (controller, battery, connectors, wheel dimensions, axle standard) is specified, we recommend checking the exact correspondence of version 6/B38, as well as the type of connector and cable length required, before installation.

Installation and points to watch out for

The "52V 1200W" choice must correspond to the scooter's configuration (52V battery and controller designed for this power level). The "short cable" version requires you to check the harness route and the available length to the controller. To avoid installation errors, it's advisable to precisely identify the motor version currently in place and compare the connections.

Expert advice

Before ordering, check compatibility with your KuKirin G3 Pro by checking the 6/B38 marking on the original motor and the required cable length (short cable). When replacing, also inspect the condition of the connectors, controller and harness (oxidation, overheating, damaged pins) to prevent any external cause from damaging the new motor. After installation, carry out a test run on the stand (wheel up), followed by a progressive test run to check the direction of rotation, the absence of abnormal noise and the regularity of acceleration.