48 V 800 W 6.5/B50 engine for SmartGyro/Urbanglide (rear)

Introducing the 48V 800W rear motor

The 48V 800W 6.5/B50 rear motor is a replacement solution designed to restore driveability and original behavior on compatible electric mobility devices. Installed on the rear wheel, it restores driveability, responsiveness to acceleration and driving pleasure, with a rated power of 800W from a 48V supply.

Concrete benefits for the user

This 48V 800W rear-mounted motor is designed to replace a worn, noisy or malfunctioning motor to get your aircraft back in service and back on the road to efficient propulsion. The rear-mounted design contributes to a more direct thrust feel, useful for recovering a smooth ride on everyday journeys. By choosing a dedicated spare part (complete engine), you limit downtime and ensure a return to service consistent with the original architecture.

Technical specifications

Type: rear wheel motor (rear). Power supply: 48V. Power: 800W. Version reference: 6.5/B50. This motor is classified in the "Motor" and "Motor and components" categories, for use as a replacement part or electrical transmission component.

Performance

The rated power of 800W associated with 48V corresponds to a motor designed to provide sustained propulsion on a compatible system, with a response suitable for use in motorized soft mobility. Final performance, however, depends on the controller, the condition of the 48V battery and the unit's original settings.

Recommended uses

Recommended for replacing a 48V rear motor on a compatible model, particularly in the event of power loss, propulsion failure or internal motor malfunction. Suitable for urban and suburban use typical of electric mobility devices (commuting, daily trips), subject to strict compatibility.

Known compatibilities

This motor is marked "for SmartGyro / Urbanglide" in rear mounting. The 6.5/B50 indication is part of the model identification and must correspond to the original configuration of your device. To avoid any errors (connections, center distance, controller, wheel size), it is essential to check that your SmartGyro or Urbanglide model corresponds to the 6.5/B50 version before ordering.

Installation and integration

Replacing a rear motor generally involves removing the rear wheel and reconnecting it to the motor/controller harness. A prior check of the 48V and power correspondence, as well as the 6.5/B50 version, is recommended to ensure correct integration with the original control system.

Expert advice

Before purchase, check compatibility: vehicle make (SmartGyro/Urbanglide), rear position, 48V voltage, and 6.5/B50 identification. When replacing, also inspect the condition of the connectors and wiring harness on the controller side (oxidation, bent pins, pinched cable), as engine failure can sometimes result from a false contact. After fitting, carry out a stand/wheel test (if possible) to check rotation and absence of rubbing before resuming driving.