Rim with 6.5/B50mm tire with 85/65 tire for Ecoxtrem : a wheel set designed to restore your electric mobility or make it run more reliably, with a complete rim + tire solution. Ideal for replacement after wear, puncture or damage, this pack allows you to start off with a homogeneous configuration, ready to take to the road again with a smooth ride.
Designed for use in urban and suburban environments, this rim and 6.5 tire set in the indicated B50mm format and 85/65 tire size aims to make your daily driving safer: better continuity of contact with the ground, healthier behavior, and rapid leveling of the rolling part.
Scroll down the page to see detailed technical specifications at the bottom ↓
Warranty : 2 years
Product presentation
The rim with 6.5/B50 mm tire fitted with an 85/65 tire is a ready-to-install solution for reconditioning a wheel on an Ecoxtrem soft mobility device. This "rim + tire" set enables you to replace a worn or damaged component while maintaining a coherent assembly, with a tire already associated with its rim to simplify the intervention and reduce the risk of dimensional error.
Benefits for the user
By choosing a rim with tire already assembled, you save time when replacing the tire, and you can be sure of choosing the right size (6.5/B50 mm rim and 85/65 tire). This spare part is ideally suited to restoring Ecoxtrem equipment's smooth running when the original wheel is tired (worn tire, marked rim), while restarting with a complete, homogeneous set.
Technical specifications
Set consisting of rim and tire. Rim size: 6.5/B50 mm. Tire size: 85/65. Categories: tire and wheel (complete wheel/castor depending on your configuration).
Recommended uses
This rim with tire is recommended for replacing a wheel/castor on Ecoxtrem equipment, particularly in the event of tire wear or deformation/damage of the rim. It is ideal for maintenance and repair operations to restore smooth mobility in everyday use.
Compatibility
Compatibility indicated: Ecoxtrem.
Expert advice
Before ordering, carefully check the markings and dimensions of your original wheel (6.5/B50 mm rim and 85/65 tire) to ensure an exact match. Also check the condition of associated components (axle, spacers, bearings, fasteners) when replacing, and carry out a trial run after fitting to confirm that the wheel turns freely and without friction.