Display Smartgyro K2 5 pins débridable ( Ewheel brand): a display screen designed to control and quickly consult the essential information of your electric mobility. This display is aimed at users looking for a clear reading of riding data and a centralized control interface, while integrating into a compatible electric bike electronic environment.
Thanks to its 5-pin connector, this electric bike display is designed to fit into a harness suitable for this type of connection. It's an ideal solution for replacing a display, or for re-commissioning a display when the original screen is damaged, illegible or faulty.
This model is indicated as unbridgable: however, this feature depends on the assembly and configuration of the associated electronics. To comply with current regulations, use on public roads must respect the rules applicable to EABs and electric mobility.
↓ Scroll down to see detailed technical specifications at the bottom of the sheet
Warranty : 2 years
Product overview
The Ewheel Smartgyro K2 5-pin Display is a display screen for electronic soft mobility systems. It allows you to view essential information from your device and control certain settings from the driver's seat, via a 5-pin connection. It's a useful replacement part in the event of a damaged, illegible or faulty screen.
User benefits
This display helps you regain clear, centralized control of your vehicle: you can read driving information on the screen, access display-related commands, and quickly put the system back into service by replacing an original module. The display format makes day-to-day use easier, keeping data visible while you're on the road.
Technical specifications (available data)
Display for soft mobility devices, with 5-pin connector. Model advertised as unlockable. Brand: Ewheel. Category: Display and Electronics.
Recommended uses
Recommended for replacing a compatible display that has failed (no display), is not reading (segments out of order) or is malfunctioning. Suitable for maintenance and repair operations on soft mobility vehicles equipped with a 5-pin display and harness.
Compatibility
Compatibility explicitly stated: Smartgyro K2, with 5-pin connection. No other compatibility (brand, controller, motor, harness generation) is specified in the information provided.
Installation and warnings
Before purchasing, check the 5-pin connection and that it matches your model (Smartgyro K2). In bicycle electronics/EDPM, the same screen can exist in several variants (pinout, firmware, communication protocol): identifying the connector and the exact model is crucial to avoid any incompatibility.
Expert advice
Switch off the power supply and, if possible, disconnect the battery before carrying out any work on the electronics. Inspect the condition of the harness (bent pins, oxidation, pinched cable): a connector problem can mimic a screen failure. If you plan to use the "unbridgable" function, make sure you comply with the applicable regulations and keep the settings adapted to your use.