Optimize the drivetrain of your SHIMANO STEPS-equipped electric bike with the SHIMANO FC-EN500 series of cranks. Designed for e-bike use, they contribute to a smooth pedaling feel and controlled motricity on a daily basis, whether in urban traffic or on more demanding routes.
This pair of 175 mm cranks is aimed at cyclists looking for a reliable electric bike drivetrain part, adapted to the specific constraints of electric assistance: higher torque, sustained cadence and frequent use. The FC-EN500 series is an integral part of the SHIMANO STEPS ecosystem, providing long-term support for your electric mobility.
Ideal for replacing or servicing your e-bike crankset, this crank set helps ensure the smooth operation of the drive chain (pedals, cranks, chainring) and safe pedaling. To avoid any assembly errors, be sure to check compatibility with your exact configuration before ordering.
Scroll down the page for detailed technical specifications (↓)
Warranty : 2 years
Product description
The SHIMANO STEPS FC-EN500 175 mm crankset series is a crankset designed to equip an electric-assist bicycle and ensure smooth transmission of pedaling effort. This crankset, dedicated to the e-bike world, is aimed at users looking for a reliable spare part to put their EAB back into service, or to finalize an assembly with a crank set adapted to soft mobility use.
Benefits for the user
With its 175 mm crank length, this SHIMANO STEPS crankset helps restore the pedaling position of an original assembly when this dimension is required. It can be used to replace worn or damaged cranks to restore smooth pedaling and good power transmission, while maintaining a configuration consistent with an electric-bike-oriented assembly.
Technical specifications
Product: crank set
Range: SHIMANO STEPS
Model: FC-EN500
Crank length: 175 mm
Indicated configuration: "SS Plateaux
Recommended uses
This series of cranks is suitable for replacing a crankset on an electrically-assisted bicycle equipped with a drivetrain compatible with the SHIMANO STEPS range, in particular as part of a repair, preventive maintenance or overhaul of an EAB used on a daily basis (urban commuting, velotaf, utility trips).
Compatibility
The compatibility explicitly indicated by the name is linked to the SHIMANO STEPS ecosystem. No other compatibility (axle type, mounting standard, precise motorization, detailed chainrings, third-party brands) is provided in the available information; we therefore recommend checking the original mounting reference and motor/pedal specifications before purchase.
Expert advice
Before replacement, check the necessary length (175 mm) to maintain identical pedaling ergonomics (position, amplitude, comfort). During assembly, inspect the condition of the pedal threads, tighten to the torque recommended by the manufacturer and apply a suitable grease to the assembly interfaces to limit squeaking and facilitate future disassembly. If your EAB is fitted with a SHIMANO STEPS motor, check the exact compatibility of the FC-EN500 crankset with your configuration (motorization model, mounting standard, chainring type) against the bike's technical documentation.