Controller for Kukirin G2 Pro (version prior to 2024) [Kugoo]

Product overview

This controller for Kukirin G2 Pro (pre-2024 version) is a replacement electronic part designed to control the operation of the electric scooter. It enables a vehicle to be put back into service in the event of a faulty controller, and to restore original driving behavior (management of acceleration, power sent to the motor and associated electrical functions).

Benefits for the user

By replacing an out-of-service controller, you restore the electronic control of your Kukirin G2 Pro: acceleration assistance is restored, controls operate consistently and power electronics failures are reduced. This is an essential solution for extending the useful life of your scooter without replacing the entire electrical system.

Technical specifications

Part type: controller (electronics). Product intended for the "controller/electronics" category for soft mobility equipment.

Recommended uses

Replacement of an original controller on a Kukirin G2 Pro electric scooter when the electronics show symptoms of failure (cuts, lack of response to acceleration, electrical malfunctions). Also suitable for restoration during maintenance or repairs to restore standard operation.

Known compatibilities

Compatible with the Kukirin G2 Pro electric scooter, pre-2024 version only. No compatibility with other models, brands, systems or generations (2024 onwards) is indicated.

Installation and precautions

Replacing a controller involves sensitive electrical connections (power supply, controls, motor links). In the absence of connection information, we recommend that you visually compare the old controller with the new one (connectors, number of pins, wiring harness) before installation, and carry out a progressive function test after installation.

Expert advice

Before purchasing, be sure to check the year/phase of your Kukirin G2 Pro: this model is advertised for the pre-2024 version. During diagnostics, also check the condition of the harness, connectors and battery, as a controller can be damaged by infiltration, a short circuit or an oxidized connector. To avoid any errors, switch off the power supply and disconnect the battery before carrying out any work, and keep a record of the wiring layout (photos) for reliable reassembly.