J&P 6-pin display with throttle and index: a control screen designed to control and monitor the essential functions of your electric bike on a daily basis. Placed at the rider's station, it makes it easy to read useful information during your journeys, and contributes to a smoother, more controlled electric mobility experience.
This display for electric-assist bicycles features 6-pin connectors and an integrated throttle, with an index for clearer, more practical use. It is aimed at users looking for an electronic part adapted to the EAB environment, to replace an existing display or to bring a display system back into service.
To ensure correct assembly, we recommend you check the 6-pin connection and its correspondence with your current installation (wiring, connector, configuration). No specific compatibility is indicated: this product should therefore be selected on the basis of available features and your original system.
Scroll down to see detailed technical specifications at the bottom of the ↓ sheet
Warranty : 2 years
Product overview
The J&P 6-pin display with throttle and index is a control screen designed for electronic systems on electric bikes and other soft mobility solutions equipped with a 6-pin compatible harness. It centralizes information displays and handlebar controls, making daily use easier and more intuitive.
Benefits for the user
This display for electric bikes makes riding easier by grouping essential functions on a single module: reading information via the display and direct access to controls via the throttle and indexing buttons. You'll gain in practicality for both urban and regular commuting, with a better-organized riding position and settings that can be accessed without taking your eyes off the road for too long.
Technical specifications (available data)
- Type: screen / display for electronic system
- Connections: 6 pins
- Integrated controls : gas pedal + index
- Brand: J&P
- Categories: Screen / Display, Electronics
Recommended uses
This display is recommended for replacing a control screen on an electric-assist bicycle or soft mobility device when the original equipment uses a 6-pin connection and a control integrating a gas pedal. It is also suitable for electronic repairs to restore handlebar controls and display.
Compatibility
Compatibility is confirmed solely on the basis of the presence of a 6-pin connector. As no other model, brand of controller, motor or communication standard is specified, we recommend that you check that the connector, wiring and functions (throttle + index) match your assembly before purchase.
Expert advice
Before installation, accurately identify your connector (number of pins, shape, coding) and check the condition of the harness (oxidation, bent pins, pinched cable). When replacing an electric bike display, always switch off the battery and avoid handling it under voltage. If in doubt about the 6-pin wiring or the presence of an original gas pedal, have the compatibility validated by a professional to avoid any risk of controller malfunction.